Vigor 2830 Series ADSL Router Firewall
The Vigor2830 is the latest generation of our flagship ADSL router/firewall range, winner of the PC Pro wireless router award for three years in a row. This latest series includes support for professional features such as VLAN tagging, Gigabit Ethernet and WiFi (ess models). The Vigor 2830's secondary WAN interface can be connected to other modems now or later (e.g. a second ADSL, BT Infinity or cable modem etc.).
Packed with features, the Vigor 2830 offers truly comprehensive ADSL connectivity and security.
Compatible with all variants of ADSL (including ADSLMax, ADSL2+ and Annex M) the Vigor 2830 can also be used for cable-modem and leased line applications using its additional gigabit ethernet WAN port. A four port Gigabit switch on the LAN side provides high speed connectivity for your server or other local PCs, for the highest speed local data transfer. Security features include content filtering, web application controls and new object based firewall management system.
Robust & Comprehensive Firewall
Security is always taken seriously with DrayTek routers. The firewall protects against attacks including DoS (Denial of Service) attacks, IP-based attacks and access by unauthorised remote systems. Wireless, Ethernet and VPN are also protected by various protection systems. The latest ('Version 3') DrayTek object-based firewall allows even more setup flexibility than ever, enabling you to create combinations of users, rules and restrictions to suit multi-departmental organisations. The Vigor 2830 now also allows selective direction firewall rules of LAN to WAN, WAN to LAN or LAN to VPN. In addition, QoS (Quality of Service Assurance) can now be selectively applied to specific users.
IPv6 - Next Generation Internet Routing
The Vigor 2830 now supports IPv6 - the successor to the current IPv4 addressing system that has been used since the Internet was first created. IPv4 address space is full up and IPv6 allows for much more efficient routing and a larger address space. IPv6 is supported both from your own ISP, but if your ISP does not (yet) support IPv6, the Vigor 2850 also supports IPv6 broker/tunnel services to provide IPv6 access using either TSPC or AICCU via 3rd party IPv6 providers.
IPv6 on the Vigor 2830 provides the following features:
-
Operation on any one of the WAN ports (ADSL, VDSL, Ethernet or 3G)
-
Connectivity to direct native IPv6 ISPs
-
Built-in tunnelling to 3rd party IPv6 brokers
supporting TSPC or AICCU methods
-
Default stateful firewall for all IPv6 LAN Clients/Devices
-
DHCPv6 Client or Static IPv6 Client
-
DHCPv6 & RADVD for client configuration
-
IP Filtering Rules
-
QoS for IPv6 with DiffServ
-
Router Management over IPv6 (Telnet/HTTP) with IPv6 Access List
-
Simultaneous (concurrent) operation with IPv4 ("Dual-Stack")
-
Other router features are available on IPv4 only currently
Web Content Filtering
The Content control features of the Vigor 2830 allow you to set restrictions on web site access, blocking download of certain file or data types, blocking specific web sites with whitelists or blacklists, blocking IM/P2P applications or other potentially harmful or wasteful content. Restrictions can be per user, per PC or univeral. Using DrayTek's GlobalView service, you can block whole categories of web sites (e.g. gambling, adult sites etc.), subject to an annual subscription to the Globalview service, which is continuously updated with new or changed site categorisations or sites which have become compromised (such as infected with Malware). A free 30-day trial is included with your new router.
Triple-WAN Load Balancing & Backup
As well as the primary ADSL (WAN) interface, the Vigor 2830 features two other WAN connections. WAN2 is Ethernet (Gigabit) and WAN3 is a USB port for connection of a 3G modem. WAN2 (Ethernet) can connect to a second ADSL modem, a cable modem or any other Ethernet-based Internet feed. The multiple WAN interfaces can be used either for WAN-Backup or load balancing.
WAN-Backup provides contingency (redundancy) in case of your primary ADSL line or ISP suffering temporary outage). Internet Traffic will be temporarily routed via the secondary Internet access. When normal services is restored to your primary ADSL line, all traffic is switch back to that.
If you don't have ADSL, the Ethernet WAN port can instead be used as your primary/only Internet connection (using NAT) so the same router can be used for either ADSL or Ethernet Internet connections.
The USB port provides Internet connectivity (main, backup or load balanced) by connecting to a compatible USB modem (or cellphone) for access to the high speed 3G cellular networks from UK providers such as Vodafone, T-Mobile, Orange, 3 and T-Mobile. If you don't have ADSL at all, the USB/3G access method can be used as your primary/only Internet connection, ideal for temporary locations, mobile applications or where broadband access is not available. In addition you can instead connect a compatible analogue modem to use analogue dial-up connections for failover in the event of your broadband failing. See seaprates page for more details on both 3G and analogue dial-up.
Technical Specification
-
Physical Interfaces:
-
LAN Ports (Switch)
-
WAN Ports:
-
ADSL Port Compliant with:
-
Secondary WAN Port : Gigabit (1000Mb/s)) Ethernet for load balance and WAN failover
-
USB Port for 3G Cellular Modem or Printer
-
VoIP: 2-port FXS Phone Ports (Vigor2830Vn only)
-
Load Balance/Failover Features:
-
Vigor 2830 ATM Protocols (DSL):
-
RFC-2684/RFC-1483 Multiple Protocol over AAL5
-
RFC-2516 PPP over Ethernet
-
RFC-2364 PPP over AAL5
-
PPPoE pass through LAN/WLAN
-
PPPoE/PPPoA Relay (ADSL Bridge; feature due Autumn 2009 ETA)
-
Transparent bridge for MPoA
-
Multiple PVC support for Triple Play Applications (up to 8 simultaneous)
-
Wireless LAN Features ('n' Models Only):
-
802.11n Switchable Dual-Band (2.4Ghz or 5.8Ghz)
-
MIMO Technology with three aerials (2T3R)
-
Multiple SSID : Create up to 4 virtual wireless LANs (independent or joined)
-
Packet Aggregation and Channel Bonding
-
Optional Higher Gain or directional aerials available - Click Here.
-
Compatible with 802.11b and 802.11g Standards
-
Active Client list in Web Interface
-
Wireless LAN Isolation (from VLAN groups and wired Ethernet interfaces)
-
64/128-bit WEP Encryption
-
WPA/WPA2 Encryption
-
Switchable Hidden SSID
-
Restricted access list for clients (by MAC address)
-
Time Scheduling (WLAN can be disabled at certain times of day)
-
Access Point Discovery
-
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
-
802.1x Radius Authentication
-
Wireless VLAN
-
Wireless Rate-Control
-
Automatic Power Management
-
802.11e WMM (Wi-Fi Multimedia)
-
VoIP Features (Vigor2830Vn only):
-
Protocols: SIP, RTP / RTCP
-
12 SIP Registrar Accounts (for up to 12 VoIP providers)
-
Line port for PSTN Passthrough (integrates POTS line)
-
Auto-fallback to PSTN under power/Internet failure
-
G.168 Line Echo-cancellation
-
Automatic Gain Control
-
Jitter Buffer ( 125ms )
-
Voice Codecs:
-
G.711 A / µ Law
-
G.723.1
-
G.726
-
G.729 A / B
-
VAD / CNG
-
Tone Generation: DTMF , Dial , Busy , Ring Back , Call Progress
-
DTMF Transmission: In Band / Out Band ( RFC-2833 ) / SIP info
-
FAX / Modem Support G.711 Pass-through
-
T.38 for FAX
-
Supplemental Services:
-
Caller ID
-
Call Hold / Retrieve
-
Call Waiting
-
Call Waiting with Caller ID
-
Call Transfer
-
Call Forwarding ( Always , On Busy and On No Answer )
-
DND (Do not Disturb)
-
Call Barring ( Incoming / Outgoing )
-
MWI ( Message Waiting Indicator ) ( RFC-3842 )
-
Hotline (Dial preset number when handset lifted)
-
WAN Protocols (Ethernet):
-
DHCP Client
-
Static IP
-
PPPoE
-
PPTP
-
L2TP *
-
BPA
-
Firewall & Security Features:
-
CSM (Content Security Management):
-
URL Keyword Filtering - Whitelist or Blacklist specific sites or keywords in URLs
-
Block Web sites by category (e.g. Adult, Gambling etc. Subject to subscription)
-
Prevent accessing of web sites by using their direct IP address (thus URLs only)
-
Blocking automatic download of Java applets and ActiveX controls
-
Blocking of web site cookies
-
Block http downloads of file types :
-
Binary Executable : .EXE / .COM / .BAT / .SCR / .PIF
-
Compressed : .ZIP / .SIT / .ARC / .CAB/. ARJ / .RAR
-
Multimedia : .MOV / .MP3 / .MPEG / .MPG / .WMV / .WAV / .RAM / .RA / .RM / .AVI / .AU
-
Time Schedules for enabling/disabling the restrictions
-
Block P2P (Peer-to-Peer) file sharing programs (e.g. Kazza, WinMX etc. )
-
Block Instant Messaging programs (e.g. IRC, MSN/Yahoo Messenger etc.)
-
Multi-NAT, DMZ Host
-
Port Redirection and Open Port Configuration
-
Policy-Based Firewall
-
MAC Address Filter
-
SPI ( Stateful Packet Inspection ) with new FlowTrack Mechanism
-
DoS / DDoS Protection
-
IP Address Anti-spoofing
-
E-Mail Alert and Logging via Syslog
-
Bind IP to MAC Address
-
Bandwidth Management:
-
QoS
-
Guaranteed Bandwidth for VoIP
-
Smart Bandwidth Limit
-
Class-based Bandwidth Guarantee by User-Defined Traffic Categories
-
Layer 2&3 (802.1p & TOS/DCSP)
-
DiffServ Code Point Classifying
-
4-level Priority for each Direction (Inbound / Outbound)
-
Bandwidth Borrowed
-
Temporary (5 minute) Quick Blocking of any LAN Client
-
Bandwidth / Session Limitation
-
Network/Router Management:
-
Web-Based User Interface (HTTP / HTTPS)
-
CLI ( Command Line Interface ) / Telnet / SSH*
-
Administration Access Control
-
Configuration Backup / Restore
-
Built-in Diagnostic Function
-
Firmware Upgrade via TFTP / FTP
-
Logging via Syslog
-
SNMP v2 & v3 management with MIB-II
-
TR-069
-
TR-104
-
VPN Facilities:
-
Up to 32 Concurrent VPN Tunnels (incoming or outgoing)
-
Tunnelling Protocols: PPTP, IPSec, L2TP, L2TP over IPSec
-
IPSec Main and Agressive modes
-
Encryption : MPPE and Hardware-Based AES / DES / 3DES
-
Authentication : Hardware-Based MD5 and SHA-1
-
IKE Authentication : Pre-shared Key or X.509 Digital Signature
-
LAN-to-LAN & Teleworker-to-LAN connectivity
-
DHCP over IPSec
-
NAT-Traversal ( NAT-T )
-
Dead Peer Detection (DPD)
-
VPN Pass-Through
-
Network Features:
-
DHCP Client / Relay / Server
-
DHCP Option 66 support
-
Dynamic DNS
-
NTP Client (Syncrhonise Router Time)
-
Call Scheduling (Enable/Trigger Internet Access by Time)
-
RADIUS Client
-
Microsoft™ UPnP Support
-
Routing Protocols:
-
Operating Requirements:
-
Rack Mountable (Optional Vigor 2830 mounting bracket required)
-
Wall Mountable
-
Temperature Operating : 0°C ~ 45°C
-
Storage : -25°C ~ 70°C
-
Humidity 10% ~ 90% (non-condensing)
-
Power Consumption: 18 Watt Max.
-
Dimensions: L240.96 * W165.07 * H43.96 ( mm )
-
Operating Power: DC 15V (via external PSU, supplied)
-
Warranty : Two (2) Years RTB
-
Power Requirements : 220-240VAC
Shopping cart
Login Status
